The following screens will help you set up PrintMaster Plus
for your disk drive and graphic card configuration. It will
include three questions as well as some explanation.

If you would like more information about setting up PrintMaster
Plus, consult the trouble shooting list included in the package.
}
When you create designs and graphics of your own, you will use
the data disk to both store and access them.
This is also where PrintMaster Plus will look for Art Gallery
graphics disks, as well as font and border disks.
}
Compatible graphics cards include:
IBM CGA        IBM EGA         Hercules Mono   Hercules Color.
As well as most graphics cards with a 640 X 200 Monochrome mode.

Computers with compatible graphics cards built in
include:
Tandy 1000     Compaq          IBM PC Jr
AT&T 6300      Leading Edge Model D.
}
If you have a Hercules or compatible graphics card answer "Y".
Several popular computers include the Hercules compatible cards
such as the Leading Edge Model D.
}
Now that you have configured for your disk drive and
graphics card, YOU MUST CONFIGURE PRINTMASTER PLUS
FOR YOUR PRINTER. To do this:

1. Choose "Setup" from the Printmaster Plus main menu.
2. Choose "Select Printer".
3. Choose the printer selection model most appropriate
   for your model printer. If you are unsure about your
   printer, consult the printer list included in the
   trouble shooting sheet enclosed in your package.
4. Make sure your printer is on, on line, and connected
   properly, then choose "Test Printer".
}
The following are possible results from the printer test:

1.  If the printer locks up or prints gibberish consult
    the trouble shooting sheet enclosed in your package.
2.  If there are skips between lines try the "CR ONLY"
    option, then retry this printer test.
3.  If it is printing on the same line over and over again
    choose the "CR with LF" option and retry this printer
    test.
4.  If the message "I'm having trouble running the printer driver!"
    appears at the bottom of the screen, try selecting a printer.
5.  If the printer prints a Christmas tree then you are done
    setting up and should choose the "All done !" option.
}
     
